SAGD flexibility for Maximum Operating Pressure
Try using a daily average MOP
What's in a limit? How much can you exceed your maximum operating pressure (MOP) and for how long?
How would you find out about these things without AppIntel? If you don't have AppIntel you are missing out on important industry intelligence.
One operator has negotiated a daily average MOP with the regulator. As long as the pressure stays at or below the MOP for an average on the day, they are in compliance.
Check out their application documents from our self serve portal.
Get details of this cool tech Subscribers get them for free?subject=Help me get up to speed on MOP advances in SAGD&body=Help me get up to speed on MOP advances in SAGD. Show me different operator's opinions from their applications.%0D%0A%0D%0AMy Name:__________ %0D%0AMy Phone Number:__________ %0D%0A%0D%0A(Or call Proven Sales at 403-803-2500.)">Contact Proven for recent developments. We stay on top of thermal recovery strategies.
Most operators try to operate right at their MOP. Since the MOP already has a safety factor built into it, they reason that operating below it is too conservative.
The higher the steam injection pressure, the further into the formation we hope it will penetrate.
The biggest concern with high injection pressure is fracturing the cap rock and seeing all the valuable steam slip out of formation. Heating the overburden is an expensive waste.
Several factors contribute to a non-stable injection pressure. Start-up conditions and temporary process blockages can vary injection pressure. The regulator was reasonable in granting a daily average measure so that this operator doesn't need to report slips over the MOP every hour.
?subject=I want a cheap and cheery one day trial of AppIntel&body=Sign me up fro a one day AppIntel trial so I can check out closure statistics. %0D%0A%0D%0AMy Name:___%0D%0AMy Phone Number:____%0D%0A%0D%0AType of applications:___%0D%0A%0D%0APricing: www.appintel.info/short-term-search/%0D%0A%0D%0A(Or call AppIntel Sales at 403-803-2500.)">Contact us now for a one day trial.
Tags: Thermal, Compliance, Heavy Oil
Granger Low 18 Oct 2016
Disposal or injector
It’s more than just a name
Industry environmental disputes come from new paradigms
How to resolve opposing agendas
AER's IAR was down
The Integrated Application Registry was down.
SAGD added CSS to make hybrid thermal scheme
Evolution or Revolution?
Six ways to unlock the secrets of high recovery polymer
Why it doesn’t always work and what to do about it
High VRR overrated?
Quotes five SPE papers
Calgary, Alberta, Canada
Share